While viewing the status of the interfaces on a Cisco switch, you see an abnormally large number of oversized Ethernet frames being received on one interface. The interface is connected to a workstation located on the 2nd floor. What could be causing this to happen?
  • show running-config interfaceshow interface
  • The workstation's network board is jabbering.
  • Enable spanning tree on the switches.
  • Duplex mismatch
A user reports that network access from her workstation is very slow. The problem does not seem to be affecting any other users.Which of the following conditions is the most likely cause?
  • Collisions
  • Duplex mismatch
  • Spanning-tree
  • Enable spanning tree on the switches.
You manage a local area network with several switches. A new employee has started today so you connect her workstation to a switch port. After connecting the workstation, you find that the workstation cannot get an IP address from the DHCP server. You check the link and status lights and the connection is working properly. A ping to the loopback address on the workstation succeeds. No other computers seem to have the problem.Which of the following is the most likely cause of the problem?
  • VLANs
  • Collisions
  • Incorrect VLAN assignment
  • Enable spanning tree on the switches.
Select the statement that best describes a broadcast storm.
  • A broadcast storm occurs when there are so many broadcast messages on the network that they approach or exceed the network bandwidth.
  • Enable spanning tree on the switches.
  • Spanning tree
  • The workstation's network board is jabbering.
You run a small network for your business that has a single router connected to the Internet and a single switch. You keep sensitive documents on a computer that you would like to keep isolated from other computers on the network. Other hosts on the network should not be able to communicate with this computer through the switch, but you still need to access the network through the computer.What should you use for this situation?
  • Incorrect VLAN assignment
  • VLAN
  • VLANs
  • Collisions
You manage a network with multiple switches. You find that your switches are experiencing heavy broadcast storms.Which of the following will help reduce the effects of a broadcast storm?
  • Collisions
  • Incorrect VLAN assignment
  • Enable spanning tree on the switches.
  • Spanning-tree
You manage a network with a single switch. On each switch port, hub connects multiple devices to the switch. Which condition are you most likely to experience on the network?
  • Collisions
  • Spanning-tree
  • VLANs
  • Enable spanning tree on the switches.
The network board in a workstation is currently configured as follows: -Network speed = Auto-Duplexing = AutoThe workstation is experiencing poor network performance and you suspect that the network board is not correctly detecting the network speed and duplex settings. Upon investigation, you find that it is running at 10 Mbps half-duplex. You know that your network switch is capable of much faster throughput. To fix this issue, you decide to manually configure these settings on the workstation.Before you do so, you need to verify the configuration of the switch port that the workstation is connected to. Given that it is a Cisco switch, which commands can be used on the switch to show a list of all switch ports and their current settings?
  • The workstation's network board is jabbering.
  • Enable spanning tree on the switches.
  • show running-config interfaceshow interface
  • Incorrect VLAN assignment
0:0:1



Answered

Not Answered

Not Visited
Correct : 0
Incorrect : 0