Orlon has a unit of -
Glycol
Isoprene
Vinyl cyanide
Acrolein
A biodegradable polymer among the following is:
Cellulose
Nylon-6
Polythene
Polyvinylchloride
The substance used to harden the rubber for tire manufacture is
CaC2
wax
carbon black
1, 3-butadiene
Terylene is not a :
Synthetic fiber
Thermosetting plastic
Step-growth polymer
Condensation polymer
Monomers that are used in the manufacture of 'Dacron' are:
Acrylonitrile and vinyl acetate
Terephthalic acid and ethylene glycol
Phthalic acid and ethylene glycol
Adipic acid and hexamethylene diamine
Which can be used as a monomer in a polymerization reaction?
C2H4
C2H6
C2H5Cl
C6H5Cl
Consider the following sequence of reactions.
HC≡CH →(i)CuCl,NH4Cl,(ii)HCl (X)→Polymerization (Y)
The polymer (Y) is -
PVC
Saran
Neoprene
Chloroprene
The chemical name of 'Melamine' is:
l, 3, 5-Triamine-2, 4, 6-triazine
2, 4, 6-Triamine-l, 3, 5-triazine
2-Amino-l, 3, 5-triazine
2, 4-Diamino-l, 3, 5-triazine
Peroxide initiated polymerizations occur via -
Hydrocarbon combustion
Natural process synthesis
Isomeric saponification
Free radical chain propagation
A thermoplastic polymer among the following is -
Bakelite
Urea-formaldehyde resin
Melamine-formaldehyde resin
Latex can be coagulated with?
CH2COOH
H2O
CH3OH
All of these
In a polymer sample, 30% of molecules have a molecular mass of 20,000, 40% have 30,000, and the rest- 60,000. What is the weight average molecular mass= of the polymer?
40,300
30,600
43,333
50,400
Reagent that is used for converting propylene to polypropylene is:
TiCl3+K/THF
TiCl4+Al(C2H5)3
TiCl3+(CH3)2Mg
TiCl4+CH3(CH2)3Al
Which of the following polymer can be used for lubrication and as an insulator?
SBR
PTFE
PAN
Polyacrylonitrile, characterized by the CN |- CH2CH -repeating unit is made from the monomer:
CH2=CHCN
CH3CH2CN
HOCH2CH2CH3
CH3CH=CHCN
The monomer used for the manufacture of PVC is obtained by the addition of -
Cl2 to ethylene
Cl2 to acetylene
HCl to ethylene
HCl to acetylene in presence of Hg2+ salts
The number average molecular mass and mass average molecular mass of a polymer are respectively 30,000 and 40,000. The polydispersity index of the polymer is
< 1
> 1
1
0
True statements regarding polymers are:
(1) Polymers have a low molecular weight.
(2) Polymers have high viscosity.
(3) Polymers scatter light.
(4) Polymers do not carry any charge.
1, 2 and3
1, 2 and 4
2, 3 and 4
1, 3 and 4
Which of the following is not correctly matched?
O ||−NH−(CH2)6−NH−CO−(CH2)4−C−n
CH2 - C = CH - CH2 - | Cln
Nylon-6, 6
PMMA
Terylene
Which /are correct about spandex?
(I) It is a polyurethane(II) It is a flexible polymer(III) It is a polymer of toluene 2, 6 di isocyanates, and glycol(IV) lt is a polymer of ammonium carbamate
I, II, III
I, II, IV
III, II, IV
I, II, III, IV
Polymers that involve cross-linkages are:
(I) Bakelite (II) High density Polythene(III) PVC(IV) Vulcanised rubber
II only
III, IV
I, IV
Incorrect statement regarding the polymers is:
They all have a repeating structural unit.
They have high viscosity.
They scatter light.
They have low molecular weights.
Which of the following compounds not contain amide linkage/group?
Acetamide
Proteins
Which of the following are biopolymers?
(a) Leather
(b) Nucleic acids
(c) Orlon
(d) Bakelite
a,b
a,b,c
b
a
Passage
The polymer is a very large molecule that is made up of repeating small molecular units called monomers. The chemical reaction that unites the monomers is called polymerization. There are homopolymers, copolymers depending upon the type of monomers present in them.
Which of the following monomers will give radical polymerization most readily?
C6H5CH=CH2
CH2=CH2
CH3−C(CH3)=CH2
CH3−CH=CH2
The polymer containing strong intermolecular forces like hydrogen bonding is
Teflon
nylon 6,6
polystyrene
natural rubber
The species which can best serve as an initiator for the cationic polymerization is
AlCl3
HNO3
LiAlH4
BuLi
Which polymer is used in the manufacture of paints and lacquers?
Glyptal
Polypropene
Polyvinyl chloride
Which of the following statements about low-density polythene is false?
It is a poor conductor of eléctricity
Its synthesis requires oxygen or Peroxide indicator as a Catalyst
Its synthesis requires high Pressure
It is used in the manufacture of buckets, etc.
Increasing order of intermolecular forces for Nylon - 6, 6, Buna-S, Polythene is-
Buna-S > Polythene > Nylon- 6,6
Buna-S < Polythene < Nylon- 6,6
Buna-S < Nylon- 6,6 < Polythene
Nylon-6,6 < Buna-S < Polythene
Please disable the adBlock and continue. Thank you.